Are uncited papers necessarily all nonimpact papers? A quantitative analysis

Scientometrics - In traditional research, the application of quantitative measurement on the value and influence of uncited papers is not feasible owing to the lack of data. The rapid advancement...     

Compensation of voltage disturbances using PEMFC supported Dynamic Voltage Restorer

The continuity of supply and quality of power are the two main significant aspects of today’s power delivery system. The Dynamic Voltage Restorer (DVR) is a series connected custom power device which improves the quality of power delivered to the consumers. This paper deals with the effectual exploitation of DVR for interconnecting the proton exchange membrane fuel cell (PEMFC) stack to the grid based on optimized proportional integral (PI) and fuzzy logic (FL) Controller. The real coded Genetic algorithm (GA) is used to optimize the PI controller parameters. The PEMFC operated boost converter is used to boost up the fuel cell output voltage to balance the DC side necessities of the voltage source converter (VSC). The proposed DVR provides balanced and unbalanced voltage sag/swell compensation, harmonic reduction as well as an active power injection to the grid. The designed method also protects the sensitive loads from source side power quality disturbances including short term interruption. In addition, the harmonic compensation performance of the proposed work is validated by comparing with the results of the H^∞ controller based DVR under medium level voltage condition. The simulation results from MATLAB/SIMULINK are discussed to prove the effectiveness of the planned method.     

Applying reticular synthesis to the design of Cu-based MOFs with mechanically interlocked linkers

The concept of“robust dynamics”describes the incorporation of mechanically interlocked molecules(MIMs)into metal-organic framework(MOF)materials such that large amplitude motions(e.g.,rotation or translation of a macrocycle)can occur inside the free volume pore of the MOF.To aid in the preparation of such materials,reticular synthesis was used herein to design rigid molecular building blocks with predetermined ordered structures starting from the well-known MOF NOTT-101.New linkers were synthesized that have a T-shape,based on a triphenylene tetra-carboxylate strut,and their incorporation into Cu(II)-based MOFs was investigated.The single-crystal structures of three new MOFs,UWCM-12(fof),β-UWCM-13(loz),UWCM-14(lil),with naked T-shaped linkers were determined;β-UWCM-13 is the first reported example of the loz topology.A fourth MOF,UWDM-14(lil)is analogous to UWCM-14(lil)but contains a[2]rotaxane linker.Variable-temperature,²H solid-state NMR was used to probe the dynamics of a 24-membered macrocycle threaded onto the MOF skeleton.     

Ni,Cr, and Fe surfaces corroded by molten ZnCl2

Understanding the corrosion of molten ZnCl₂ on metal surfaces is significant for the corrosion protection of metals, sustainable use of molten salts, preparation of ZnO coatings, and so on. In this paper, surfaces of pure Ni, Cr, and Fe corroded by molten ZnCl₂ were investigated. The results show that Ni suffered very slight corrosion, while Cr experienced more serious corrosion than Ni, but lighter corrosion than Fe. The morphology of the corrosion of Cr and Fe, respectively, presented pitting and intergranular corrosion characteristics. Furthermore, nanostructured ZnO coatings were obtained on the surfaces of Ni and Fe, but not on the surface of Cr. The ZnO coating on the Ni surface was doped with a small amount of Zn₅(OH)₈Cl₂, and the ZnO coating on the Fe surface was doped with ZnFe₂O₄ and Zn₂OCl₂. The coatings on the Ni and Fe surfaces had an average thickness of 1.5 and 50 μm, respectively.     

Deposition of ZnO thin film on polytetrafluoroethylene substrate by the magnetron sputtering method

Due to the excellent optical and electrical properties, ZnO thin films deposited on flexible substrates can be used as technologically promising electron devices. Polytetrafluoroethylene (Teflon) had many advanced properties, such as high dielectric strength over various frequencies, low dissipation factor, and high surface electrical resistivity, which had made Teflon a competitive polymer choice in a variety of microelectronic applications. In our work, ZnO film was firstly deposited on Teflon substrate by the magnetron sputtering method. X-ray diffraction data revealed that the ZnO grains were highly c-axis-oriented and nanostructured with the size of 10–30 nm, which was in accordance with the experimental result of Scanning Electron Microscopy.     

Effect of deformation route on microstructural development in aluminum processed by equal channel angular extrusion

Aluminum has been deformed by equal channel angular extrusion (ECAE) to obtain submicron-grained structures under different deformation routes. The deformation routes were varied by rotating billets through 0, 90, and 180 deg between each extrusion pass, and were designated as route A, B_C, and C, respectively. Based on quantitative microstructural analysis, the effectiveness of the deformation route is shown to depend upon the different definition used. The order of effectiveness is (a) A > B_C > C for both 90 and 120 deg dies, in terms of the generation of high-angle grain boundaries (HAGBs); (b) B_C > C > A for both 90 and 120 deg dies, in terms of the formation of equiaxed shape of grains; and (c) B_C > A > C for 90 deg die and B_C ∼ A > C for 120 die, in terms of reducing grain size. It is suggested that the generation of HAGBs can be related to the accumulation of nonredundant strain, while the shape and orientation of grains may be linked to the shearing patterns of the deformation route.     

Antilipid a monoclonal antibody HA-1A: immune complex clearance of endotoxin reduces TNF-alpha, IL-1 beta and IL-6 production

When the projecting point of saphenous nerve in second somatosensory cortex (S II) of cat was stimulated, the evoked potentials elicited by C-fiber inputs of saphenous nerve recorded in the primary somatosensory cortex (C-CEP) might be either inhibited or facilited according to whether the superficial and/or the deeper layer of the cortex was stimulated. The inhibition was expressed as a decrease of amplitude and prolongation of latency of C-CEP; while the facilitation, as an increase of amplitude and duration of C-CEP. When the superfaicial layer of S II was stimulated by weaker current, both inhibitory and facilitatory effects could be observed, but only inhibitory effect was observed, when the deep layer was stimulated. With the same intensity of stimulation, inhibitory effect was more pronounced when the deep layer rather than the superficial layer was stimulated. It is suggested that S II may play a role in the modulation of C-CEP of S I.